An interior design blog with furniture reviews, interior decorating tips, DIY projects, and home furniture guides.

Posts Tagged ‘Upholstered Headboard’

DIY Headboard and Other Options

Tuesday, February 2nd, 2010

Headboard1

Make Upholstered Headboard” was first posted by my predecessor, Nicolette the Design Diva, on July 7th, 2009. After reading the blog entry, Sandra Barton made her own headboard and she recently sent me the pictures to show other Furniture and Design Ideas readers that it’s not too difficult.

Sandra writes:

Hi Heather,

Headboard2

Here are some pictures of the headboard. The instructions were great. I did add some coordinating upholstered buttons to give it a more tailored look – I measured and drilled holes in the back of the plywood and then used quadrupled button thread to pull it tight. All in all, this cost me about $100 to make.  The most expensive supply was the foam.

Thanks so much … Love your blog!

Sandra Barton

Thanks for the kind words, and thank you for sharing this with us Sandra – your upholstered headboard turned out great. It’s always good to hear from readers and even better when they send pics!

If you’re DIY-ing your headboard, then like Sandra, you already know how you want it to look. But what if you’re not DIY inclined? Here are some tips on how to get the headboard you really want.

The bed or headboard, like the Fashion Bed Group Dunhill Wood Headboard, is the automatic focal point of the room. Consider what kind of “statement” you would like the headboard to make. After all, when you (or someone else) enter the room, it will be the first thing you see. Do you want it to be imposing? The old headboard was made of wood: do you want your new headboard to be upholstered or to be made of metal? Would you like the look of a traditional poster bed but don’t want a footboard?

When purchasing a headboard for a room that has already been furnished, you will want to match the headboard to the bedroom’s existing décor. This means it should be the same color and/or style as your bedroom furniture and should blend with the other color elements in the room such the walls or the curtains.

The most obvious requirement when selecting a headboard for your bedroom is that, if you already have a bed frame and don’t intend on replacing the mattress/foundation (box spring), then the headboard size will have to match the mattress size.

But there are other things to consider as well. If you are in the habit of reading in bed, you may want the added comfort an upholstered headboard will provide or the convenience of additional storage a bookcase headboard offers.

Don’t forget height. Especially if you are selecting a headboard for a bed that has a plush or thick mattress, you will want the headboard to be tall enough to be seen. Buying high or tall headboards or pairing one with a low-profile type of bed can be useful when you want to showcase a specific type of material, such as a leather headboard, or a modern metal headboard like the Fashion Bed Group Brooklyn Metal Headboard with a unique design. As you can see in Sandra’s second picture, the height of her upholstered headboard really makes the bed “pop,” a combination of how tall the headboard is and the fabric she chose.

When buying a headboard, also give some thought to how it will work with your current bed or bed frame. Some bed frames are independently freestanding, but most are designed to be mounted on a wall, like an upholstered headboard. Don’t panic! If you have purchased a headboard that ends up not playing nice with the bed frame you already own or just bought, you can always secure it to the wall and place the bed in front of it.

Thanks again Sandra for sharing your DIY upholstered headboard with us. For those of us who can’t find the time to DIY, Cymax Stores is offering 10% off Skyline Furniture headboards, including upholstered headboards. Should you like to take advantage of these savings, use the coupon code SKY10 at checkout.

To view other entries in the “Design Files Of Heather B.” series, click here.

Make Upholstered Headboard

Tuesday, July 7th, 2009

How To Make an Upholstered Headboard

DIY Upholstered Headboard

Make Upholstered HeadboardNow that your bed is done, it’s time to get started on a beautiful DIY upholstered headboard!

The first thing you should do is pick out your fabric. Find a swatch of whatever you like – whether it you go with microfiber, leather, or velvet – and bring it into your bedroom. Does it match your drapes? Walls? Comforter?

Once you’ve found a fabric you like, start thinking about what shape you’d like your headboard to be. If you’re planning to cut out the design yourself, you might want to stick to something simpler so it isn’t as difficult. If you’re going to get the shape pre-cut, why not try a unique shape for your headboard? Research headboards on the Internet and decide on the shape for you.

The following are tools and supplies that you’ll need to make a upholstered headboard:

-         A jigsaw (if you’re shaping the headboard yourself)

-         Pencil, scissors, utility knife

-         Staple gun

-         Tape measure

-         ¼ or ½ inch plywood (depending on your stability preference)

-         2 inch thick foam

-         Fiberfill (or “batting”)

-         Your fabric choice

-         Template papers (once again if you’re going to cut it yourself)

You’ll need to measure the width of your mattress before you get started. Your headboard should typically be slightly wider than your mattress.

Then, you’ll need to decide how high you want your headboard to be. Are you using it for decoration only, or are you going to rest against it while watching TV or reading? If the latter is the case for you, make sure your head will rest comfortably against the headboard – and not the wall.

Once you have your plywood cut out & sanded, either by you or a professional, you’ll need the foam cut next in the same shape. Remember that the foam should be around 2 inches thick to be properly comfortable.

Then, you’ll need to get fiberfill cut off a roll from the store. Add about 12 extra inches, since you’ll need to wrap the entire thing around the headboard, and not just place it in front. When it comes to your fabric, you’ll need to do the same thing – order 12 extra inches, since it will wrap around the headboard too.

Once all of your pieces are cut out and ready to be put together, you’ll need a big, open, flat surface to work on. Then, follow these steps:

-         Iron your fabric before you start working with it (if it needs to be de-wrinkled) – you’ll want it to be nice and smooth once completed.

-         Place the fabric flat, faced down on the smooth surface.

-         Layer the fiberfill over the fabric – they should be the same size. Next, put the foam over the fiberfill. Finally, finish off the layering with the plywood on top. All four of the layers should now be sandwiched together.

The fabric and fibrefill should be equally aligned with each other, and the foam and plywood should be lined with one another. The fabric and fiberfill should extend more than the foam and plywood so it can be wrapped around the back.

-         Pull the fabric and fiberfill to the back of the plywood and begin evenly stapling it in place with the staple gun.

The staples should be ¼ inches in size, and should be applied 2 inches apart. Test it first – staple every corner, flip the headboard around, and see if it looks good. If so, continue stapling the spaces between, and if it doesn’t, take out the staples and try again.

-         If there’s any excess material at the end, trim it off with your scissors.

Now it’s time to put up your new headboard! Flush mounts are recommended for supporting headboards on walls. All you do is apply them to the wall, and the back of your headboard, and they slide together, interlocking one another. The headboard is guaranteed not to bang against the wall every time you get in bed, like some loose headboards! How do you install flush mounts?

-         Locate the studs on the wall behind the space where the headboard will rest.

-         Attach the bottom part of the flush mount to the wall and then into the studs as widely as possible (within the width of your headboard).

-         Lean the headboard against your wall to get the location of the receiving flush mount on your headboard.

-         Remove headboard and drill the holes for the mounts.

-         Attach the mounts facing down, and then lift your headboard on your wall to secure it.

Step back  upholstered headboard – together! Remember, if the headboard is off center or just in a weird position, you can always reset the wall mounts – they aren’t permanent!

For inspiration (or just in case you’re not a fan of DIY), check out these upholstered headboaords

Let me know when you make a upholstered headboard, I would love to post the pictures.

Nicolette Interior Design Diva